The Name You Trust for your
The Only Thermostat Replacement Guide
Understanding your thermostat and ensuring it works is extremely important for your comfort. Before we get started, we wanted to offer a quick tip. Did you know that turning your thermostat back 7-10F for 8 hours can save you 10% on your electricity bill?
In this post, you'll uncover the best guide on your thermostat replacement. Let's discover the methods to help you replace your thermostat.
1. Thermostat Replacement Prices
Do you think you need an electrician for your thermostat? Think again! Many plumbing professionals will certainly assist in installing your thermostat. They can assist you in changing your old thermostat with only 2 wires.
Don't suffer from heating or AC issues, extreme weather can cause harm to you and your loved ones. To replace a thermostat in Northwest Houston can range from the high $900s to mid-$1000s. This includes labor and the thermostat itself.
2. Just how to Change an Old Thermostat?
First, you'll need to shut off power to the thermostat. You can do this by locating your circuit breaker. This is an important step to ensure your safety.
Next, remove the screws that hold your thermostat to the wall. Pull the thermostat away from the wall. You will see a few wires that you need to address. Pay attention to how the old thermostat is wired; you may consider taking a picture.
See where the wires are connected. There should be a cable for the A/C, and also one for the water; which are attached to the thermostat's screws.
Usually, you'll see the screws marked with letters. Before you remove any wires, you'll want to cover up the wiring with masking tape. Write the letter from the screw on top of the tape.
You can use a screwdriver to loosen up the screws. Take the wires out from the screw.
Remove the mounting-plate screws and remove the thermostat from the wall surface. Reuse your old thermostat.
Placing your New Thermostat
Your new thermostat should come with stickers. Place the stickers onto the wires. You can reference the old thermostat's wiring and check your new manual. You'll then need to loosen the terminal screws.
Place the new base over the wires and make sure it's level.
Next, drill the holes making sure to follow the directions in the manual. Place the plastic inserts into your wall.
You can then use a combination stripper to trim the wires if necessary.
Once it's connected you can activate the power back on.
Checking the Functionality
As soon as you've figured out just how to change out your old analog thermostat with a digital thermostat, you're practically prepared to go. But first, let's check to make sure it is working properly.
You can set the thermostat to your furnace. The AC will come at a different time. Let them have 5 minutes to activate. If it's not working correctly take a look at what you did and make sure no steps were missed.
At times, you may need to reset the thermostat. You should find a button that allows you to reset it.
Once you check to make sure it is functioning, you'll need to program your thermostat. This is where you need to check the manual for specific instructions, depending on your new thermostat.
A programmable thermostat is your best option to save on your electricity bill.
GET IT FIXED?
Contact Us Now!
Exploring Thermostat Replacement in Youngstown
After reviewing this overview, you must have a far better understanding of thermostat replacement.
Do you need assistance with cooling and heating services in Youngstown? Call us today and we can come out and survey your area! We are available 24/7.
Fine young man and as far as I am concerned he can be his permanent tech. He was very polite and he was very pleased with him and will be calling us again to work with Manolo. Manolo needs a pat on the back and he did a good job.
Great tech Great service
Kyle did an excellent job. He was very thorough and explained everything from start to finish. I would strongly recommend Kyle for any plumbing you might have.
"Great service ,plumber was very good and did a great job .very happy"
Chad C. with 1-800-plumber really cared. He was extremely thorough and made sure the job was done correctly. Would definitely recommend him!
1-800-Plumber fixed burst water pipe in my home. Hector and Chad explained the issue well, communicated timelines and completed work with an affordable price tag. I recommend their services.
fast appointment. service tech was awesome.
Nick was very nice, professional, and explained what he was going to do first and if we had to do something else we talked first. Nick knew his job. Great work. Appreciate you!
Detailed orientated and honest inspection. Chad took his time and explained everything that was going on very well. The service fee was fair for the small issues he fixed, and he was able to make a referral for water restoration for us, I would use his service again and plan to when our water heater goes out.
This is a very professional and helpful team! Would definitely recommend to all my friends and family in the Houston area!
costs at the end of a job
Committed to on-time arrivals