The Only Thermostat Replacement Guide
Understanding your thermostat and ensuring it works is extremely important for your comfort. Before we get started, we wanted to offer a quick tip. Did you know that turning your thermostat back 7-10F for 8 hours can save you 10% on your electricity bill?
In this post, you'll uncover the best guide on your thermostat replacement. Let's discover the methods to help you replace your thermostat.
1. Thermostat Replacement Prices
Do you think you need an electrician for your thermostat? Think again! Many plumbing professionals will certainly assist in installing your thermostat. They can assist you in changing your old thermostat with only 2 wires.
Don't suffer from heating or AC issues, extreme weather can cause harm to you and your loved ones. To replace a thermostat in Sugar Land can range from the high $900s to mid-$1000s. This includes labor and the thermostat itself.
2. Just how to Change an Old Thermostat?
First, you'll need to shut off power to the thermostat. You can do this by locating your circuit breaker. This is an important step to ensure your safety.
Next, remove the screws that hold your thermostat to the wall. Pull the thermostat away from the wall. You will see a few wires that you need to address. Pay attention to how the old thermostat is wired; you may consider taking a picture.
See where the wires are connected. There should be a cable for the A/C, and also one for the water; which are attached to the thermostat's screws.
Usually, you'll see the screws marked with letters. Before you remove any wires, you'll want to cover up the wiring with masking tape. Write the letter from the screw on top of the tape.
You can use a screwdriver to loosen up the screws. Take the wires out from the screw.
Remove the mounting-plate screws and remove the thermostat from the wall surface. Reuse your old thermostat.
Placing your New Thermostat
Your new thermostat should come with stickers. Place the stickers onto the wires. You can reference the old thermostat's wiring and check your new manual. You'll then need to loosen the terminal screws.
Place the new base over the wires and make sure it's level.
Next, drill the holes making sure to follow the directions in the manual. Place the plastic inserts into your wall.
You can then use a combination stripper to trim the wires if necessary.
Once it's connected you can activate the power back on.
Checking the Functionality
As soon as you've figured out just how to change out your old analog thermostat with a digital thermostat, you're practically prepared to go. But first, let's check to make sure it is working properly.
You can set the thermostat to your furnace. The AC will come at a different time. Let them have 5 minutes to activate. If it's not working correctly take a look at what you did and make sure no steps were missed.
At times, you may need to reset the thermostat. You should find a button that allows you to reset it.
Once you check to make sure it is functioning, you'll need to program your thermostat. This is where you need to check the manual for specific instructions, depending on your new thermostat.
A programmable thermostat is your best option to save on your electricity bill.
Exploring Thermostat Replacement in Sugar Land
After reviewing this overview, you must have a far better understanding of thermostat replacement.
Do you need assistance with cooling and heating services in Sugar Land? Call us today at 832-987-1680 and we can come out and survey your area! We are available 24/7.
GET IT FIXED?
Contact Us Now!
Kyle, was great! 800-PLUMBER called to say when he would arrive, and he was right on time. He even completed another job that wasn't planned on my end while he was there. I would recommend 800-Plumber to any of my family or friends. Laura Clear Lake
Nice bunch of guys. Did what they said and did it very well. Explained everything and took extra pre cautions with the Virus outbreak.
He is very professional and very respectful.
This was my first time with 1-800-Plumber Air of Pearland. I called with a minor issue with the dishwasher drain hose and asked that a tech be dispatched on Saturday so that I could be home from work. Chad was scheduled between 8am & 10am today (Sat) and arrived just before 9am. Chad was very knowledgeable and explained to me the entire process. He also answered my many many questions about what he was doing as he was doing it. I'm a smart guy but know very little about plumbing. I felt very comfortable with Chad doing the repair. The long and the short of it, 1-800-Plumber Air of Pearland has a new longtime customer and I will request that Chad be sent if possible the next time I have a plumbing issue.
The tech was so nice, knowledgeable and efficient.
Emanuel came out to inspect why our commode was not flushing properly. After an inspection he describer the options. Since the commode was over 40 years old we picked the option to replace the commode with a new one. He Asked several questions about what we would like and the showed us two options. We picked the one that we liked and he obtained the commode from the ware house and installed it the same afternoon.. He completed the installation and did a great clean up of the area and answered answered all of our questions. I fully recommend Emanuel and 1-800-Plumber of Pearland
Chad C. with 1-800-plumber really cared. He was extremely thorough and made sure the job was done correctly. Would definitely recommend him!
The tech was so nice, knowledgeable and efficient.
Fine young man and as far as I am concerned he can be his permanent tech. He was very polite and he was very pleased with him and will be calling us again to work with Manolo. Manolo needs a pat on the back and he did a good job.
Detailed orientated and honest inspection. Chad took his time and explained everything that was going on very well. The service fee was fair for the small issues he fixed, and he was able to make a referral for water restoration for us, I would use his service again and plan to when our water heater goes out.
costs at the end of a job
Committed to on-time arrivals