1-800-PLUMBER +AIR Lansdale
Thermostat Services

1. Thermostat Replacement Prices

Do you think you need an electrician for your thermostat? Think again! Many plumbing professionals will certainly assist in installing your thermostat. They can assist you in changing your old thermostat with only 2 wires.

Don't suffer from heating or AC issues, extreme weather can cause harm to you and your loved ones. To replace a thermostat in Lansdale can range from the high $900s to mid-$1000s. This includes labor and the thermostat itself.

2. Just how to Change an Old Thermostat?

First, you'll need to shut off power to the thermostat. You can do this by locating your circuit breaker. This is an important step to ensure your safety.

Next, remove the screws that hold your thermostat to the wall. Pull the thermostat away from the wall. You will see a few wires that you need to address. Pay attention to how the old thermostat is wired; you may consider taking a picture.

See where the wires are connected. There should be a cable for the A/C, and also one for the water; which are attached to the thermostat's screws.

Usually, you'll see the screws marked with letters. Before you remove any wires, you'll want to cover up the wiring with masking tape. Write the letter from the screw on top of the tape.

You can use a screwdriver to loosen up the screws. Take the wires out from the screw.

Remove the mounting-plate screws and remove the thermostat from the wall surface. Reuse your old thermostat.