1-800-PLUMBER +AIR Dallas
Thermostat Installation & Replacement

Your new thermostat should come with stickers. Place the stickers onto the wires. You can reference the old thermostat's wiring and check your new manual. You'll then need to loosen the terminal screws.

Place the new base over the wires and make sure it's level.

Next, drill the holes making sure to follow the directions in the manual. Place the plastic inserts into your wall.

You can then use a combination stripper to trim the wires if necessary.

Once it's connected you can activate the power back on.

As soon as you've figured out just how to change out your old analog thermostat with a digital thermostat, you're practically prepared to go. But first, let's check to make sure it is working properly.

You can set the thermostat to your furnace. The AC will come at a different time. Let them have 5 minutes to activate. If it's not working correctly take a look at what you did and make sure no steps were missed.

At times, you may need to reset the thermostat. You should find a button that allows you to reset it.

Once you check to make sure it is functioning, you'll need to program your thermostat. This is where you need to check the manual for specific instructions, depending on your new thermostat.

A programmable thermostat is your best option to save on your electricity bill.